“Is 65g too light for you? That’s ok, float isn’t for everyone! Weighing in at a solid 68.3g, exuding stability and spin power for eons, presenting the King Sago.
The King’s identical 7068 cups are crowned with rims of raw brass instead of stainless steel to increase the overall weight and performance of this royal edition of the Sago.
Classy competition ready.
Are you ready to kick it with the King?”
Colorways
The King Sago is currently only available green with brass rims.
What’s in the Box
Each King Sago comes in a hand-stamped, numbered box, making every piece feel special. Included with the yo-yo is a Zipline ZS Air 100% nylon string, a TRT sticker, and a TRT Series #4 POG.
“Space: the final frontier. These are the voyages of the yoyo Enterprise. Its five-year mission: to explore strange new skill toys; to seek out new throws and new tricks; to boldly yo where no man has yo’d before.
It uses a 4mm x 20mm stainless steel shelf pin as the axle. These are the ones I used. https://amzn.to/41RypW. I recommend a tiny drop of super glue in the axle hole then the pin, then the other half with glue as well. Print at 100% infill or it may not work. If you print it and it doesn’t come back up add a drop of lube or rub some chapstick on the end of your string and after a couple throws it will work just right.
There are two stand models, I would start with the smaller model and use it unless you yours doesn’t fit, then print out the larger one.
It also functions as a mediocre spin top if you get bored with yoyoing.”
Interested in 3D-printing this yo-yo? Get the files here: The Quark, a Yo-Yo
From Sickburn Yo-Yo Workshop:
“This is The Quark, sequel to The Ork and The Dork.
It uses a 4mm x 20mm stainless steel shelf pin as the axle. These are the ones I used. https://amzn.to/41RypW. I recommend a tiny drop of super glue in the axle hole then the pin, then the other half with glue as well. If you want it to work well slice it to 54-60 grams weight.
If you print it and it doesn’t come back up add a drop of lube or rub some chapstick on the end of your string and after a couple throws it will work just right.
Interested in 3D-printing this yo-yo? Grab the files here: The Honeybee Yo-Yo
From Sickburn Yo-Yo Workshop:
“Oh look another yo-yo. This time it’s honeybee themed. Includes original crayon drawing by yours truly. Beehive shaped yoyo with honeycomb that act as the response system to make it come back up.
It uses a 4mm x 20mm stainless steel shelf pin as the axle. These are the ones I used. https://amzn.to/41RypW. I recommend a tiny drop of super glue in the axle hole then the pin, then the other half with glue as well. Print this one at 100% infill.
If yours doesn’t want to come back up please add a drop of lube to the end of your string or some chapstick rubbed on it.”
Interested in 3D-printing this yo-yo? Grab the files here: The Dork (A YoYo)
From Sickburn Yo-Yo Workshop:
“This is the sequel to my yoyo The Ork, this is a more laid back smaller less bitey yoyo.
Like the Ork It uses a 4mm x 20mm stainless steel shelf pin as the axle. These are the ones I used. https://amzn.to/41RypW. I recommend a tiny drop of super glue in the axle hole then the pin, then the other half with glue as well. This one is intended to be printed with 100% infill.
In addition to being cute the face has an actual purpose and functions as the response system, what makes it go up and down. In this case the glasses are also slightly embossed on the inside to provide a more reliable response.“
