Aaron received five of the original raw YWET’s from Sonny in 2015. Later he purchased two more from Trevlor on Instagram. Sonny then sent 6 more original YWET’s to AaronW. One was blasted and finished half gold/half blue. The bearing posts on this one were cut down. This allowed the halves to be screwed together without shims, it made for a 3.6mm gap and was fully responsive. The other 5 were all polished and given away to friends. The following are the end results.
This YWET was polished, then anodized in clear to protect it. 1 of 1. Anodized by “Adventures in Anodizing.”
![clearywetaw](https://yoyoarchive.org/wp-content/uploads/2017/09/clearywetaw.png)
This YWET was bead blasted, then anodized half red/half gold. No engravings. 1 of 1. Anodized by “Adventures in Anodizing.”
![redgoldywetaw](https://yoyoarchive.org/wp-content/uploads/2017/09/redgoldywetaw.png)
These were bead blasted, and then finished half clear/half red. 2 of these were made. 1 has glued in spacers and has been traded a few times. Anodized by “Adventures in Anodizing.”
![](https://yoyoarchive.org/wp-content/uploads/2022/12/red-clear-ywet-aaron-2.jpg?w=1024)
![](https://yoyoarchive.org/wp-content/uploads/2022/12/red-clear-ywet-aaron.jpg?w=1024)
This one was was bead blasted and anodized half gunmetal grey/half gold. 1 of 1. Anodized by Gruntbull.
The last two are currently polished and raw aluminum. Will eventually be anodized.
![IMG_4060](https://yoyoarchive.org/wp-content/uploads/2017/09/img_4060.jpg)
Blue/Gold 3.5mm Gap
![](https://yoyoarchive.org/wp-content/uploads/2022/12/blue-gold-1.jpg?w=691)
![](https://yoyoarchive.org/wp-content/uploads/2022/12/blue-gold-2.jpg?w=713)
![](https://yoyoarchive.org/wp-content/uploads/2022/12/blue-gold-3.jpg?w=747)
![](https://yoyoarchive.org/wp-content/uploads/2022/12/blue-gold-4.jpg?w=759)